F.E.A.R. Posted June 23, 2019 Share Posted June 23, 2019 Playing this game for more than 10 years, I never got to ask if it's possible to use the "new" voice lines from Yuri's Revenge into Red Alert 2. I mean the vehicle and navy voice lines. In Red Alert 2, all vehicles and navy use the same voice. E.g. the Soviet vehicles use the Rhino tank voice line, while the navy uses the Dreadnought voice line. So is it possible to change their voice lines into their Yuri version? Link to comment Share on other sites More sharing options...
[CC] RaVaGe Posted June 23, 2019 Share Posted June 23, 2019 Yes, it is possible, you'll need to extract the sound files from YR and edit the RA2 ini settings for sounds. You can find more info on https://www.ppmsite.com/ Don't ask me to do it for you or what how and where. Link to comment Share on other sites More sharing options...
F.E.A.R. Posted June 23, 2019 Author Share Posted June 23, 2019 3 hours ago, RaVaGe said: Yes, it is possible, you'll need to extract the sound files from YR and edit the RA2 ini settings for sounds. You can find more info on https://www.ppmsite.com/ Don't ask me to do it for you or what how and where. That's why I asked. There has to be some program to extract them or some guide how to do it. You could have at least provided me with a direct link on ppmsite. Link to comment Share on other sites More sharing options...
dkeeton Posted June 24, 2019 Share Posted June 24, 2019 12 hours ago, F.E.A.R. said: That's why I asked. There has to be some program to extract them or some guide how to do it. You could have at least provided me with a direct link on ppmsite. You use xcc mixer for it. I don't remember where exactly but there is a sound editor in one of the menus at the top. Link to comment Share on other sites More sharing options...
[CC] RaVaGe Posted June 24, 2019 Share Posted June 24, 2019 (edited) Yeah, you can use it extract sound files. On 6/23/2019 at 1:07 PM, F.E.A.R. said: So is it possible to change their voice lines into their Yuri version? This was your only question... Edited June 24, 2019 by RaVaGe Link to comment Share on other sites More sharing options...
F.E.A.R. Posted June 24, 2019 Author Share Posted June 24, 2019 12 hours ago, dkeeton said: You use xcc mixer for it. I don't remember where exactly but there is a sound editor in one of the menus at the top. I installed it. But it says "Open failed". Does that mean it doesn't load RA2? 4 hours ago, RaVaGe said: This was your only question... I was going to ask, but you said I shouldn't on how to do it. I'm only looking to use the YR voice and that's it, and not modding stuff. This should have been updated officially 18 years ago, but it never was. What a joke. Link to comment Share on other sites More sharing options...
dkeeton Posted June 24, 2019 Share Posted June 24, 2019 4 hours ago, F.E.A.R. said: I installed it. But it says "Open failed". Does that mean it doesn't load RA2? I was going to ask, but you said I shouldn't on how to do it. I'm only looking to use the YR voice and that's it, and not modding stuff. This should have been updated officially 18 years ago, but it never was. What a joke. Oh I see, you just need to use xcc mixer to extract the audio from langmd.mix and put in language.mix. Link to comment Share on other sites More sharing options...
F.E.A.R. Posted June 24, 2019 Author Share Posted June 24, 2019 25 minutes ago, dkeeton said: Oh I see, you just need to use xcc mixer to extract the audio from langmd.mix and put in language.mix. OK I extracted the audiomd.mix from langmd.mix, but how do I put in language.mix? Link to comment Share on other sites More sharing options...
dkeeton Posted June 25, 2019 Share Posted June 25, 2019 2 hours ago, F.E.A.R. said: OK I extracted the audiomd.mix from langmd.mix, but how do I put in language.mix? you should move the files you want form audiomd.mix to audio.mix. XCC Mixer has 2 columns, so you can have 2 mixes opened at the same time and you can drag and drop stuff. 1 Link to comment Share on other sites More sharing options...
F.E.A.R. Posted June 25, 2019 Author Share Posted June 25, 2019 9 hours ago, dkeeton said: you should move the files you want form audiomd.mix to audio.mix. XCC Mixer has 2 columns, so you can have 2 mixes opened at the same time and you can drag and drop stuff. It won't let me drag and drop files, that's the problem that I first encountered. It won't even let me do anything when I right click, only six options are available. Opening the audiomd.mix and audio.mix won't let me drag and drop files. Link to comment Share on other sites More sharing options...
[CC] RaVaGe Posted June 30, 2019 Share Posted June 30, 2019 You need to use the mix editor that was installed with the mixer. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now